CAUTION! Both the carrier board and the Universal I/O module are electrostatic sensitive devices. Please observe precautions for handling. Wear an anti-static strap and use a flat anti-static surface when installing an Universal I/O module.
| 1. | Set the carrier board on a flat anti-static surface with the component side facing upward. |
| 2. | Remove the Universal I/O cover from front panel. |
| 3. | Insert the Universal I/O module connectors into the front panel cutout for the Universal I/O module with the component side of the Universal I/O module facing the carrier board. |
| 4. | Align the socket with the 2×10 pin header on the carrier board and gently press down on the rear of the Universal I/O module. |
| 5. | Insert front panel cover with cutouts for the Universal I/O modules connectors. Adjust the mating height of the socket and 2×10 pin header for proper alignment of the connectors in the front panel. |
| 6. | Fasten the Universal I/O module by installing the supplied screw through the bottom side of the carrier board. |